It is inconvenient when the washing machine is not filling with water as it should be, whether it is brand new or you have had it for years. Having to schedule time to fix your washing machine means you won’t be able to do laundry for a while, and your dirty clothes will have to wait. But there is no reason to freak out. Occasionally, you can fix the issue without calling in the experts immediately!
If you have noticed the following:
- You heard banging sounds from the washer after switching it on, but no water entered;
- The washer stops mid-cycle since the drum is empty
- You noticed that no water fills the machine when you turn it on
Keep reading to know how you can fix the washer that will not fill up with water and learn the common problems that plague washing machines, especially if they won’t fill with water.
Tips on How to Repair A Washing Machine Not Filling Up With Water
If you are new to this and are unsure how to turn on the water for your washing machine, you only have to look for the wheel-shaped valve and turn it clockwise a few times. But if your washer still won’t fill with water, try the following the steps we indicated below:
Study the Hoses
Remove the hoses from the washer. As a first step, make sure all of the faucets are on and let water in. If it isn’t, this could be why the washer spins but doesn’t fill. Other reasons for preventing water from passing through include:
- Kinked Hose: There are times that the washing machine has water in it, but they are sitting at the bottom. If there is no water at all, you only need to straighten out the hose and give it another go.
- Damaged Hose: Replace immediately as your washer leaks when filling, which is why no water is entering.
- Clean Filter
Clogs in the filter commonly cause a washer not to fill with water. Turn off the power and unplug the hoses connected to the back of your washer. The washer filters will be visible in the water inlet valve at the machine’s rear. Remove debris, reattach the hoses, and give it another shot after cleaning.
Examine Water Inlet Valve
If the filter is clean, check the water entry valve next, as they could be a possible cause for replacement. Also, check the control panel buttons to see if they are completely depressed and if the water volume selector switch is set to the correct level. You may fix your water problem with a quick readjustment of these components.
Test Water Level Switch
Before anything else, unplug the washer first. A transparent conduit leads to the water level switch, making it immediately visible. Put it through its paces with your volt-ohm meter. Put it in RX1 and probe every conceivable pairing between the three connectors to ensure everything works. Afterward, you must get a zero reading on one set and all the others. Otherwise, you need to replace the water level switch.
Inspect the Pressure Chamber
Air might get stuck in the pressure hoses of your washing machine if the pressure chamber gets clogged. The pressure switch will remain on as a result. The fact that the washer will clean and spin with no water in it is a telltale sign of a water-related malfunction. You must clear the tube and replace the pressure chamber when fixing your washing machine.
Common Problems Why is Washer Not Filling Up With Water
Are you sick and tired of seeing filthy laundry piling up everywhere? Worried you won’t be able to afford a reliable Samsung laundry appliances repair? Do not worry; we will walk you through the three most common causes of a washer that won’t fill with water.
Humming
A common symptom of this issue is a soft humming noise from the washer, which may be difficult to detect at first but will have a different pitch than the normal hum of a washer filling with water. The humming sound is usually indicative of a tap problem located at the back of the washer and prevents water from entering the unit. This also causes the washer to only fill up halfway due to low water pressure.
Kinked or Damaged Hose
A kinkled hose is more frequent than most people realize, but luckily it can be fixed quickly and easily by just unkinking the hose. However, a damaged hose prevents adequate supply, and only a replacement can take care of the problem.
Water Valve Issue
The water valve is to blame if water flows through the hose but not into your washer. When checking, exercise caution with the water valve filter, as most can be quite brittle. Sometimes, cleaning the filter to cure your water supply dilemma is all it takes.
There is no way to trick your washer to fill up with water unless you fix the actual problem. If none of our repair tips seems to describe your situation or you can’t find similarities between your problems with the ones we have listed, do not hesitate to seek advice from our Samsung Repairs technicians. We have a highly trained and well-versed team to guide you through your appliances whenever you need installation, repair, or maintenance services.
Trusted by many for years, every one of our new and long-term customers can indefinitely enjoy their perks when trusting our company. We have been in the business for many years, with a team holding combined decades of experience. They have worked around many models, types, and sizes of appliances from Samsung, ensuring to stay updated with the brand’s latest innovations to serve every customer to the best of their ability. When you trust Samsung Repairs, you can expect to receive the 100% guaranteed outcomes we have always delivered. After all, the best appliances in the market need the best technicians.
Feel free to read more of our blogs or drop us a line for direct advice and guidance. We are happy to answer your inquiries anytime.